.png)
Smooth movement without the guessing
Mechanical parts traced
We inspect the linkage from the control point through to the footrest.
Jams properly identified
We separate obstruction, wear and disconnection from powered failures.
Repeated movement test
We cycle the chair to confirm that the footrest follows the mechanism.
Deal with a footrest that won't behave
A footrest that rises crookedly, sticks halfway or refuses to lock can make a recliner awkward and unsafe to use. We carry out recliner mechanism repair in Llanelli for manual and powered chairs with physical movement faults. We inspect the linkage, pivots, brackets, cables, fasteners and moving frame to find wear, distortion, obstruction or disconnection. This mechanical check matters because a chair that won't move isn't automatically suffering from a motor fault. Sometimes one loose fitting or disconnected linkage prevents the rest of the mechanism from doing its job.
Make sure each moving part tracks correctly
Once we've located the cause, we may adjust, reconnect or repair the affected section, or fit a suitable component where replacement is needed. We then open and close the chair repeatedly to see how the footrest tracks with the main mechanism. This shows whether both sides move evenly and whether the recliner reaches its proper positions. We also look for cables or objects catching within the movement path. Powered faults involving controls or electrical parts receive separate testing, so a physical jam isn't confused with a loss of power.
Frequently asked questions
Why is my recliner footrest opening unevenly?
One side may have a loose fastener, worn pivot, distorted bracket or disconnected linkage. An obstruction can also disrupt its travel. We inspect both sides of the mechanism and compare their movement before deciding what needs adjustment or repair.
Is a jammed recliner always an electrical fault?
No. A physical obstruction, bent part, loose fixing or failed linkage can prevent movement even when the powered system works. We examine the mechanical path and, where relevant, check the controls and motor so we don't confuse one fault with another.
How do you test a repaired footrest?
We operate the recliner through repeated opening and closing cycles. We check that the footrest follows the main mechanism, reaches the intended positions and moves evenly. We also watch for catching cables, loose parts or renewed movement at the repair point.